MTK Android Flasher SP Flash Tool

SP Flash Tool v5.1552 Windows

SP Flash Tool v5.1552 Linux

SP Flash Tool v3.1344.0.212

[post_ad]

How To Flash Tutorial:

What's needed:

1. USB data cable
2. MediaTek USB VCOM Drivers
3. MTK Flash Tool  ( Latest version SP Flash Tool )

• First of all, make sure that MediaTek DA USB VCOM Drivers installed.

Flashing the whole ROM:

• Open SP Flash Tool, then click Scatter-loading button to load the correct scatter file (MTXXXX_Android_scatter_emmc.txt) for your device.

• Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
• Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. 
• The process will start and a red progress bar will appear.

• After the red progress bar is complete, there will appear a purple and then yellow progress bar filling up.

• When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, 
• Which means that the process has been successfully Completed.
• Now You can safely disconnect your phone and turn it on. 
• Its Done.

Flashing only part of the ROM:

• In case you want to flash just one part of the ROM, that is also possible.

Example

• Only recovery image will be flashed. 
• Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).

• The tool will show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.

• The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.

• Please note that, 
  

  preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.

Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.

Join Us!