Nokia 225 SPD6531A W25Q32BV 4Mb Flash File

 Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM27
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot9...
  CPU    type: 6531A
  Flash  type: NOR
  Flash    ID: 00EF0040(00160000)
  Flash Model: W25Q32BV
  Flash  Size: 0x400000(4.0M)
  reading,Wait...
  Read Completed.
>>File save to: 

6531A_W25Q32BV.bin
Free firmware Without password
[post_ad]

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash SPD6531 Chip.

Join Us!

  

Haier P7 HM-M511 MT6261 Flash File

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FLYCOM61D_M872C_HAIER_B2438_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V13_F1.bin
FileVersion : MAUI.11C.W13.52.MP.V13.F1
[ScatCFG] : MT6261 / MAUI.11C.W13.52.MP.V13.F1 / NOR , SF
Firmware saved to :

FLYCOM61D_M872C_HAIER_B2438_PCB01_gprs_MT6261_S00 Scatter

How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

[post_ad]

FLYCOM61D_M872C_HAIER_B2438_PCB01_gprs_MT6261_S00 Bin

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.

Done!

Join Us!

  

Haier Esteem i90 MT6735 Firmware

Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A01906532474127FD07059F0A2908
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A48414732650507FD270829B29F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0x0D22E2281B6E64C166EA5E5EAA62145C
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : Haier
ProdName  : Haier i90
ProdModel : Haier i90
Device    : Haier i90
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : Haier-i90-H01-S023-PK
[Read Ok] : preloader_m20_haier_op1_pk.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6735 / V1.1.2 / m20_haier_op1_pk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1635 MiB
Scatter saved to :

MT6735__Haier__Haier_i90__Haier_i90__5.1__Haier-i90-H01-S023-PK

preloader_m20_haier_op1_pk.bin : 139KB

Paid File: RS.200

Payment info: Whatsapp+923136969696

JazzCash: 03156969696

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6735_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Haier Esteem i50 MT6582 Firmware

Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 70010056313030303806BA7EB003723D
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 70010056313030303806BA7EB003723D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0x0D22E228B53376BE5B0B5466594B03A1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : Haier
ProdName  : I50
ProdModel : I50
Device    : i50_b1b8
AndroidVer: 5.0.2
MTKxCPU   : MT6582
MTKxPRJ   : I50-H01-S011-PK
[Read Ok] : preloader_i50_b1b8_dual_pk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6582 / V1.1.1 / i50_b1b8_dual_pk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1422 MiB
Scatter saved to : 

MT6582__Haier__I50__i50_b1b8__5.0.2__I50-H01-S011-PK

preloader_i50_b1b8_dual_pk.bin : 120Kb

Paid File: RS.200

Payment info: Whatsapp+923136969696

JazzCash: 03156969696

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6582_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

B-Fly B9 SPD6531 Flash File

Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo : 
Model Vendor : SPD6531
Model Name   : B9 B-Fly
Saved to : 

SPD6531_00400000_W25Q32__SPD6531-B9 B-Fly.bin
Free firmware Without password
[post_ad]

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash SPD6531 Chip.

Done!

Join Us!

  

Galaxy Grand Prime G530H MT6572 firmware

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594816A1349702704D
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1349702704D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0x0D22E228B24894199E79E66F62FF3B2A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : samsung
ProdName  : SM-G530H
ProdModel : SM-G530H
Device    : fortunalte
AndroidVer: 4.4.4
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1
[Read Ok] : preloader_e118_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / e118_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 668 MiB
Scatter saved to :

MT6572__samsung__SM-G530H__fortunalte__4.4.4__ALPS.JB3.MP.V1

preloader_e118_lca.bin :99.3Kb

Free Firmware Without Password

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Glaxay J5 SM-J500H MT6572 Firmware Android Ver 5.1.1

Glaxay J5 SM-J500H MT6572 Android Ver 5.1.1

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E4A5330304D00BEAA0C1F40B1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00BEAA0C1F40B1
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x0D22E228D9E2746B147A3E2FE063E997
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : samsung
ProdName  : SM-G530F
ProdModel : SM-G530F
Device    : SM-G530F
AndroidVer: 4.4.4
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1
[Read Ok] : preloader_mbk72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 456 MiB
Scatter saved to :

MT6572__samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1

preloader_mbk72_wet_jb3 : 97.8Kb

Password: mbk72_wet

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Samsung Galaxy J2 SM-J200H MT6572 Firmware

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D43303447584108D94F91B7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447584108D94F91B7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 0x0D22E228F8734289A191E761437E904C
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : Samsung
ProdName  : Galaxy-J2
ProdModel : SM-J200H
Device    : Galaxy-J2
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : J7225_5.0_V1.6
[Read Ok] : preloader_j7225.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / j7225 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 688 MiB
Scatter saved to :

MT6572__Samsung__SM-J200H__Galaxy-J2__4.4.2__J7225_5.0_V1.6

Password: Galaxy-J2

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Galaxy A9 SM-A9000 MT6580 Firmware Android Ver 6.0

Galaxy A9 SM-A9000 Android Ver 6.0

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E4361726420263C54326033DB
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420263C54326033DB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 0x0D22E228D2D7E5EF083D4C160B1A98F0
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
Brand     : alps
ProdName  : full_gxq6580_weg_l
ProdModel : gxq6580_we_l
Device    : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
[Read Ok] : preloader_gxq6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / gxq6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1314 MiB
Scatter saved to :

MT6580__alps__gxq6580_we_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62

Free firmware password: gxq6580

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Glaxay A7 SM-A7100 MT6580 Firmware Android Ver: 6.0

Glaxay A7 SM-A7100 Android Ver: 6.0

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001005631303030385025E55EEDC2C1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 7001005631303030385025E55EEDC2C1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]
DEV RID    : 0x0D22E2283DF374262E0EFDBF6B4265F7
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ... 
Brand     : alps
ProdName  : full_gxq6580_weg_l
ProdModel : gxq6580_weg_l
Device    : gxq6580_weg_l
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62
[Read Ok] : preloader_gxq6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / gxq6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1086 MiB
Scatter saved to :

MT6580__alps__gxq6580_weg_l__gxq6580_weg_l__5.1__ALPS.L1.MP6.V2_GXQ6580.WEG.L_P62

Free firmware password: gxq6580
[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6580_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Qmobile X25 Clone MT6572 Firmware

Reading Flash Content now ... 
Brand     : TINNO
ProdName  : s4011
ProdModel : S4011AP
Device    : s4011
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1
[Read Ok] : preloader_s4011.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / s4011 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 677 MiB
Scatter saved to : 

MT6572__TINNO__S4011AP__s4011__4.4.2__ALPS.KK1.MP6.V1

Free firmware Without password
[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6572_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

All done!

Join Us!

  

Qmobile XL20 MT6261 Flash File Bin + Scatter

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin
FileVersion : QMobile_XL20_V07
Saved to :

FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin

Free file Without password

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_XL20_V07.bin
FileVersion : QMobile_XL20_V07
[ScatCFG] : MT6261 / QMobile_XL20_V07 / NOR , SF
Firmware saved to : 

FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00 Scatter

Free firmware Without password
[post_ad]

How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Done!

Join Us!

  

Qmobile W200 MT6260 Flash File Bin + Scatter

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : 

DEWAV60A_128_11B_C3468_PCB01_gprs_MT6260_S00.C3478_DC34781_QMOBILE_L105.bin

Free firmware Without password
[post_ad]

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.

FileVersion : C3478_DC34781_QMOBILE_L105
[ScatCFG] : MT6260 / C3478_DC34781_QMOBILE_L105 / NOR , SF
Firmware saved to :

DEWAV60A_128_11B_C3468_PCB01_gprs_MT6260_S00 Scatter

Free file Without password

How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Done!

Join Us!

  

Qmobile R1500 SPD6531A 16Mb Flash File

> Scanning Mobile USB Port...
    Detecting COM Port COM91
>>> Connecting Mobile,Wait..
    Mobile Connection Success.
    Project ID: SPRD3
>>> Downloading First Boot...
    CPU Name: 6531A
    Flash ID: 00EF006000180000
    Flash Name: W25Q128DW
    Flash Size: 0x1000000->16.0M
>>> Reading Flash,Wait...
    Read Done.
    File save to:

Qmobile R1500 SPD6531A 16Mb

Free firmware Without password
[post_ad]

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash SPRD6531A Chip.

Join Us!

  

Qmobile R740 MT6261 Flash File Bin + Scatter

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F5.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F5
Saved to :

FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F5.bin

Free firmware Without password
[post_ad]

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.

Done!

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F5.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F5
[ScatCFG] : MT6261 / MAUI.11C.W13.52.MP.V2.F5 / NOR , SF
Firmware saved to :

FISE61D_11C_PCB01_gprs_MT6261_S00 Scatter

Free file Without password

How To Flash MTK Feature Phone:

• Its a Scatter file you can flash it with Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect XXXX_cfg in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Done!

Join Us!

  

Qmobile K135 SPRD6531A Flash File

SPD6531_00400000_W25Q32__Qmobile K135

Free firmware Without password
[post_ad]

InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo : 
Model Vendor : SPRD6531
Model Name   : Qmobile K135
Saved to : SPD6531_00400000_W25Q32__SPRD6531-Qmobile K135.bin 
Done!
  [screen lock]:3111
  [Phone Lock]  0000
  [Phone Lock]  6666

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash SPD6531A Chip.

Join Us!

  

Qmobile B85 MT6261 Flash Files

Qmobile B85 MT6261 Flash Files

Free firmware Without password
[post_ad]

Boot downloading complete!
  Flash ID: 0030000000EF0040
  Chip Capacity: 0x300000(3MB)
  Mobile phone software version for:B2300BP_MP_QMB_PK_09_12
  Baud adjust...complete.
  Flash reading complete!
  privacy:9944
  privacy:0000
  privacy:9578
 saved in :

Qmobile MT6261 Ok.bin, size: 3 M

Free file Without password

How To Flash:

its a bin flash file and you can flash it with any flashing box or flash tool which is support to flash MT6261 Chip.

Join Us!

  

Qmoible A51 MT6572 Firmware

MT6572__QMobile__QMobile A51__s7521__4.2.2__ALPS.JB3.MP.V1

Free firmware Without password
[post_ad]

How To Flash:

• Its a Scatter file you can flash it with SP Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT65XX_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here

Join Us!