QMobile A65 MT6572 Firmware Tested

Inital Boot Ok!

BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D4201E62B616B80ED
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D4201E62B616B80ED
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0A4A5F4D842489532D9D0C5C382B9C30
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash now ... 
Brand     : QMobile
ProdName  : A65
ProdModel : QMobile A65
Device    : A65
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : A65_MP_130910
[Read Ok] : preloader_huaqin72_we_iba_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / huaqin72_we_iba_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 943 MiB
Scatter saved to 

MT6572_QMobile_A65_A65_4.2.2_A65_MP_130910

Free firmware Without password

[post_ad]

How To Flash:

• Its a Scatter file you can flash it with Sp Flash Tool or any Flasher Box 
• Select “scatter-Loading” and Slect MT6572_Android_scatter.txt in folder
• Wait file to be added into Flash Tool Or Any Flashing box
• Select “Download Only” or if upgrade “Firmware upgrade” in Flash Tool
• Turn off your phone
• Press “Download” Button to start
• And connect your phone with PC via USB data cable.
• The process will start and a red progress bar will appear after color purple, yellow.
• And green circles display
• Finish !
• You can now safely disconnect your phone and turn it on.
• its Done..!

Full Tutorial Here